| 1. |
No person shall engage in the practice of professional engineering in this State unless the person.
|
|
|
is licensed under or exempt from Vermont State Board of Engineers rules and laws. |
|
|
Is graduated from a credit university. |
| 2. |
No person shall use in connection with the person’s name any letters, words, or insignia, including "Professional Engineer," "P.E.," "PE," or "P.Eng.," indicating that the person is a professional engineer unless the person is licensed in accordance with this chapter.
|
|
|
True |
|
|
False |
| 3. |
A person who is engineering a building that contains only one, two, or three dwelling units and any outbuilding accessory to those units, is exempt from having a P.E. License |
|
|
True |
|
|
False |
| 4. |
Any officer or employee that works for federal government, the State, or any of municipalities is exempt from having a P.E. license. |
|
|
True |
|
|
False |
| 5. |
Licenses shall be renewed every two years without examination and on payment of the required fees. However, by rule, the Board may establish a continuing education requirement. If the Board establishes a continuing education requirement and a licensee fails to demonstrate compliance with that requirement, it may deny or condition renewal. |
|
|
after opportunity for hearing. |
|
|
After an affidavit signed by the licensee. |
| 6. |
Following expiration of a license, it may be reinstated upon payment of a renewal fee and a late renewal penalty. A licensee _________ pay renewal fees during periods when the license was expired. |
|
|
Shall not be required to |
|
|
shall |
| 7. |
After a licensee receives his or her registration as a P.E Engineers.
- Each licensee shall obtain a seal of a design approved by the Board by rule.
- Plans, specifications, reports, and other instruments of service issued by a licensee shall be signed and sealed by the licensee.
|
|
|
True |
|
|
False |
| 8. |
A person who affixes to a plan or other document the seal of a licensee without the licensee’s authorization shall be fined not more than $1,000.00 or imprisoned not more than 30 days, or both.
|
|
|
True |
|
|
False |
| 9. |
Signing or sealing instruments of service for which the engineer is not in responsible charge, or negligently allowing use of the engineer’s professional stamp on such an instrument is considered: |
|
|
Unprofessional conduct |
|
|
Bad engineering |
| 10. |
Accepting and performing engineering responsibilities that are outside the scope of engineering specialties held by the licensee is considered unprofessional conduct.
|
|
|
True |
|
|
False |
|
