| 1. |
Busbars is a conducting bar (usually made of copper) that carries currents to various electric circuits. |
|
|
True |
|
|
False |
| 2. |
___________ is an enclosure designed for surface mounting or flush mounting that houses controls and electrical components. |
|
|
Cabinet |
|
|
Bumpers |
| 3. |
____________is light gauge sheet metal folded support or equipment frame to shed water or snow onto the roof. |
|
|
Counter flashing |
|
|
Cold joint |
| 4. |
What does ASCE stand for? |
|
|
American Society of Civil Engineers |
|
|
American Standards for Civil Engineers |
|
|
American Society of Construction Engineers |
|
|
None of the above |
| 5. |
___________ is defined as a turning force around a bolt applied by twisting a bolt head or nut so the components will not separate. |
|
|
Torque |
|
|
Buckling |
| 6. |
Angles or other steel shapes with elastomeric padding rigidly mounted to the building structure in a pattern around the equipment base to limit horizontal movement are known as Anchors. |
|
|
True |
|
|
False |
| 7. |
_____________ is a steel cable designed for use as a seismic sway brace for suspended equipment, piping, ductwork, or raceways. |
|
|
Cable brace |
|
|
Cold joint |
| 8. |
What does CAMA stand for? |
|
|
Concrete Anchors Manufacturers Association |
|
|
Concrete Anchors Manufacturers Association |
|
|
Concrete Anchors Manufacturers Association |
|
|
None of the above |
| 9. |
Construction documents consist of drawings, specifications, and manufacturer’s instructions (approved by the appropriate design professional) that define the scope of a project and provide detailed information to seismically restrain the equipment, piping, ductwork, or raceways. These documents are also known as blue prints. |
|
|
True |
|
|
False |
| 10. |
Head joint is a space provided between buildings or portions of a building to prevent contact caused by differential movement during an earthquake. |
|
|
True |
|
|
False |
| 11. |
A large bolt with a threaded shaft and a hexagonal-shaped bolt head typically used for embedment into concrete surfaces or in-filled concrete walls is called as a ______________. |
|
|
Headed stud |
|
|
Housekeeping stud |
| 12. |
Raceway is a channel (conduit or open raceway) designed to hold wires and cables or Busbars. |
|
|
True |
|
|
False |
| 13. |
What does FEMA stand for? |
|
|
Federal Emergency Management Agency |
|
|
Federal Earthquake Management Agency |
|
|
Federal Emergency Management Association |
|
|
None of the above |
| 14. |
Post-tension (pre-stressed) building is a concrete building structure surface with internal steel cables that are stretched and restrained to permanently compress the concrete surface. |
|
|
True |
|
|
False |
| 15. |
Seismic support of equipment and internal components that can be traced through connections and support steel to the building structure is called as a Load path |
|
|
True |
|
|
False |
| 16. |
What does VISCMA stand for? |
|
|
Vibration Isolation and Seismic Control Manufacturers Association |
|
|
Vibration Isolation and Society Control Manufacturers Association |
|
|
Vibration Isolation and Seismic Civil Manufacturers Agency |
|
|
None of the above |
| 17. |
____________is a weld between two pieces of steel where the welded surfaces are at right angles. |
|
|
Fillet weld |
|
|
Plug weld |
| 18. |
An enclosed space usually made from galvanized sheet steel allowing airflow one duct system to another is called a plenum. |
|
|
True |
|
|
False |
| 19. |
_____________ is a steel angle or strut channel designed for use as a seismic sway brace for suspended equipment, piping, ductwork, or raceways. |
|
|
Solid brace |
|
|
Strut |
| 20. |
Transverse braces are components containing resilient elements such as steel springs, air springs, molded pre-compressed fiberglass or elastomeric pads used to separate vibrating equipment, piping and ductwork from the building structure. |
|
|
True |
|
|
False |
|
