| 1. |
______________ is a smooth or deformed steel bar or threaded rod, set in a predrilled hole in hardened concrete or masonry (including masonry units and mortar joints) that derives its holding strength from a chemical bonding compound placed between the wall of the hole and the embedded portion of the anchor. |
|
|
Adhesive anchor |
|
|
Anchor plate |
| 2. |
Design professional is the responsible party, recognized by the authority having jurisdiction, working within their scope of qualifications and providing design services. |
|
|
True |
|
|
False |
| 3. |
___________ is defined as a turning force around a bolt applied by twisting a bolt head or nut so the components will not separate.
|
|
|
Torque |
|
|
Buckling |
| 4. |
What does ASCE stand for? |
|
|
American Society of Civil Engineers |
|
|
American Standards for Civil Engineers |
|
|
American Society of Construction Engineers |
|
|
None of the above |
| 5. |
Roof decks are known as the ceiling joists supporting intermediate floors or roof made from steel angles and steel bars. |
|
|
True |
|
|
False |
| 6. |
Angles or other steel shapes with elastomeric padding rigidly mounted to the building structure in a pattern around the equipment base to limit horizontal movement are known as Bumpers.
|
|
|
True |
|
|
False |
| 7. |
_____________ is a steel cable designed for use as a seismic sway brace for suspended equipment, piping, ductwork, or raceways. |
|
|
Cable brace |
|
|
Cold joint |
| 8. |
What does CAMA stand for?
|
|
|
Concrete Anchors Manufacturers Association |
|
|
Concrete Anchors Manufacturers Association |
|
|
Concrete Anchors Manufacturers Association |
|
|
None of the above |
| 9. |
Construction documents consist of drawings, specifications, and manufacturer’s instructions (approved by the appropriate design professional) that define the scope of a project and provide detailed information to seismically restrain the equipment, piping, ductwork, or raceways. These documents are also known as blue prints. |
|
|
True |
|
|
False |
| 10. |
Head joint is a space provided between buildings or portions of a building to prevent contact caused by differential movement during an earthquake. |
|
|
True |
|
|
False |
| 11. |
A large bolt with a threaded shaft and a hexagonal-shaped bolt head typically used for embedment into concrete surfaces or in-filled concrete walls is called as a ______________. |
|
|
Headed stud |
|
|
Housekeeping stud |
| 12. |
What does FEMA stand for? |
|
|
Federal Emergency Management Agency |
|
|
Federal Earthquake Management Agency |
|
|
Federal Emergency Management Association |
|
|
None of the above |
| 13. |
____________is a weld between two pieces of steel where the welded surfaces are at right angles.
|
|
|
Fillet weld |
|
|
Plug weld |
| 14. |
Seismic support of equipment and internal components that can be traced through connections and support steel to the building structure is called as a Load path |
|
|
True
|
|
|
False |
| 15. |
Post-tension (pre-stressed) building is a concrete building structure surface with internal steel cables that are stretched and restrained to permanently compress the concrete surface.
|
|
|
True |
|
|
False |
| 16. |
What does UBC stand for?
|
|
|
Uniform Building Code |
|
|
Uniform Building Council |
|
|
United Building Code
|
|
|
None of the above |
| 17. |
The ability of an object to resist a force that would cause its rotation or movement around a point or axis is known as ______________.
|
|
|
Moment-resistant |
|
|
Threading |
| 18. |
Pitch pocket is defined as a frame on a roof contouring the sealing material protecting the penetrations or surface mounted equipment supports on an unprotected building structure.
|
|
|
True |
|
|
False |
| 19. |
_____________ is a steel angle or strut channel designed for use as a seismic sway brace for suspended equipment, piping, ductwork, or raceways.
|
|
|
Solid brace |
|
|
Strut |
| 20. |
Transverse beams are components containing resilient elements such as steel springs, air springs, molded pre-compressed fiberglass or elastomeric pads used to separate vibrating equipment, piping and ductwork from the building structure.
|
|
|
True |
|
|
False |
|
